Merge latest master before offline asset support

README.md

@@ -73,6 +73,7 @@ bash install.sh
   clash secret 123   🔐 设置密钥
 📌 高级
   clash lan          🏠 局域网代理管理
+  clash ipv6         🌐 IPv6 / IPv6-only 节点管理
   clash tun          🧪 Tun 模式管理（需root方式安装）
   clash boot         🚦 开机代理接管管理
   clash mixin        🧩 Mixin 配置管理
@@ -158,6 +159,32 @@ clash lan off
 
 ------
 
+## 🌐 IPv6 / Hysteria2
+
+Mihomo 支持 Hysteria2。若节点服务端只有 IPv6 地址，需要同时启用内核 IPv6 与 DNS AAAA：
+
+```bash
+clash config kernel mihomo
+clash ipv6 on
+clash ipv6 status
+```
+
+其他可用操作：
+
+```bash
+clash ipv6 off
+clash ipv6 auto
+```
+
+- `on`：同时写入 `ipv6: true` 和 `dns.ipv6: true`。
+- `off`：同时关闭内核 IPv6 与 DNS AAAA。
+- `auto`：保留订阅原有的 IPv6 设置；订阅未配置时继续使用兼容默认值。
+- 使用 IPv6-only 节点前，宿主机仍需具备可用的 IPv6 默认路由。HY2 使用 UDP / QUIC，网络或防火墙也必须允许相应 UDP 流量。
+
+也可以在 `.env` 中设置 `CLASH_IPV6=true`、`false` 或 `auto`，然后执行 `clash config regen`。
+
+------
+
 OpenWrt 下 root/system 安装会把 `clash`、`clashon`、`clashoff` 等命令入口写入 `/usr/bin`，运行状态、日志和内核二进制仍保存在项目目录的 `runtime/` 下。仅脚本模式不会注册开机自启，设备重启后需要重新执行 `clashon`。
 ## 🧰 常用管理命令
 
@@ -204,7 +231,7 @@ clash add "file:///绝对路径/clash.yaml" home
 
 - Clash / Mihomo YAML
 - Base64 订阅
-- 分享链接（`vmess` / `vless` / `trojan` / `tuic`）
+- 分享链接（`vmess` / `vless` / `trojan` / `tuic` / `hysteria2` / `hy2` / `anytls`）
 
 ### 开机接管（内核 + 代理）
 
@@ -322,12 +349,15 @@ CLASH_BUNDLED_ASSET_ENABLED=true
 CLASH_OFFLINE=false
 CLASH_SHELL_AUTO_RESTORE_PROXY=true
 CLASH_PREDOWNLOAD_GEO=true
+CLASH_IPV6=auto
 ```
 
 按需设置即可，不需要每项都写。
 
 - `CLASH_SHELL_AUTO_RESTORE_PROXY`：控制登录 Shell 是否自动恢复上次 `clashon` 写入的代理变量。默认 `true` 保持兼容；如果不希望 SSH 远程登录后自动带上 `http_proxy` / `https_proxy`，设为 `false`，之后仍可手动执行 `clashon`。
 - `CLASH_PREDOWNLOAD_GEO`：控制安装期是否预下载 GEO 数据。默认 `true`，会提前下载 `Country.mmdb`、`geoip.metadb`、`GeoIP.dat`、`GeoSite.dat` 等规则分流常用资源；临时部署、只想先跑起来时可设为 `false` 跳过安装期预下载。注意：当最终运行配置实际使用 `GEOIP` 规则时，启动前仍会按需准备 `Country.mmdb`，否则 Mihomo 无法可靠加载该配置。
+- `CLASH_IPV6`：可设为 `true`、`false` 或 `auto`。`true` 同时启用内核 IPv6 与 DNS AAAA，适用于 IPv6-only 节点；`auto` 保留订阅中的 IPv6 设置。
+- `CLASH_SUBSCRIPTION_UA`：覆盖拉取订阅时的 User-Agent。默认使用 `clash-verge/v2.4.0`，以便订阅服务返回 Mihomo 支持的 Hysteria2、AnyTLS 等现代协议节点；如果服务商有专用 UA 要求，可在此显式设置。
 
 #### GitHub 下载加速
 

scripts/core/clashctl.sh

@@ -37,6 +37,7 @@ Usage:
   mixin                          🧩 Mixin 配置管理
   relay                          🔗 多跳节点管理
   lan                            🏠 局域网代理管理
+  ipv6                           🌐 IPv6 / IPv6-only 节点管理
   
 
 📦 Subscription:
@@ -49,6 +50,7 @@ Usage:
   clashui                        🕹️  查看 Web 控制台
   secret                         🔑 查看或设置 Web 密钥
   lan on|off|status              🏠 开启 / 关闭局域网代理
+  ipv6 on|off|auto|status        🌐 管理内核与 DNS IPv6
 
 🧪 Transparent proxy:
   tun                            🧪 Tun 模式管理
@@ -3290,6 +3292,7 @@ cmd_ui_help_summary() {
   printf '  %-18s %s\n' "clash ls" "📜 查看订阅列表"
   echo "📌 高级"
   printf '  %-18s %s\n' "clash lan" "🏠 局域网代理管理"
+  printf '  %-18s %s\n' "clash ipv6" "🌐 IPv6 / IPv6-only 节点管理"
   printf '  %-18s %s\n' "clash tun" "🧪 Tun 模式管理"
   printf '  %-18s %s\n' "clash mixin" "🧩 Mixin 配置管理"
   printf '  %-18s %s\n' "clash sub" "🧩 订阅高级管理（启用 / 禁用 / 重命名 / 删除）"
@@ -4403,6 +4406,84 @@ cmd_lan() {
   esac
 }
 
+print_ipv6_status() {
+  local mode mode_text kernel_ipv6 dns_ipv6 kernel
+
+  mode="$(config_ipv6_mode)"
+  kernel_ipv6="$(runtime_config_ipv6_enabled 2>/dev/null || echo "等待运行配置生成")"
+  dns_ipv6="$(runtime_config_dns_ipv6_enabled 2>/dev/null || echo "等待运行配置生成")"
+  kernel="$(runtime_kernel_type 2>/dev/null || echo unknown)"
+
+  case "$mode" in
+    true) mode_text="已开启" ;;
+    false) mode_text="已关闭" ;;
+    *) mode_text="自动（保留订阅设置）" ;;
+  esac
+
+  ui_title "🌐 IPv6"
+  ui_kv "🔧" "配置模式" "$mode_text"
+  ui_kv "🚀" "当前内核" "$kernel"
+  ui_kv "🌐" "内核 IPv6" "$kernel_ipv6"
+  ui_kv "🔎" "DNS AAAA" "$dns_ipv6"
+  if [ "$kernel" != "mihomo" ]; then
+    ui_warn "Hysteria2 建议使用 Mihomo：clash config kernel mihomo"
+  fi
+  ui_blank
+}
+
+cmd_ipv6() {
+  local action
+  prepare
+
+  action="${1:-status}"
+  case "$action" in
+    on|enable)
+      set_config_ipv6_mode true
+      regenerate_config
+      apply_runtime_change_after_config_mutation
+      success "IPv6 与 DNS AAAA 已开启"
+      print_ipv6_status
+      print_config_apply_feedback
+      ;;
+    off|disable)
+      set_config_ipv6_mode false
+      regenerate_config
+      apply_runtime_change_after_config_mutation
+      success "IPv6 与 DNS AAAA 已关闭"
+      print_ipv6_status
+      print_config_apply_feedback
+      ;;
+    auto|reset)
+      set_config_ipv6_mode auto
+      regenerate_config
+      apply_runtime_change_after_config_mutation
+      success "IPv6 已恢复为自动模式"
+      print_ipv6_status
+      print_config_apply_feedback
+      ;;
+    status)
+      print_ipv6_status
+      ui_next "IPv6-only / Hysteria2 节点不可用时执行：clash ipv6 on"
+      ui_blank
+      ;;
+    -h|--help|help)
+      echo "📜 用法："
+      echo "  clash ipv6 status"
+      echo "  clash ipv6 on"
+      echo "  clash ipv6 off"
+      echo "  clash ipv6 auto"
+      echo
+      echo "🌐 说明："
+      echo "  on   同时启用内核 IPv6 与 DNS AAAA"
+      echo "  off  同时关闭内核 IPv6 与 DNS AAAA"
+      echo "  auto 保留订阅中的 IPv6 设置，缺省时沿用兼容默认值"
+      ;;
+    *)
+      die_usage "未知的 ipv6 子命令：$action" "clash ipv6 on|off|auto|status"
+      ;;
+  esac
+}
+
 print_profile_use_feedback() {
   local profile="$1"
 
@@ -7262,7 +7343,7 @@ cmd_sub() {
 
   case "${1:-}" in
     update)
-      regenerate_config
+      regenerate_config "manual-refresh"
       apply_runtime_change_after_config_mutation
       print_config_regen_feedback
       print_config_apply_feedback
@@ -8087,6 +8168,7 @@ case "$cmd" in
   dev)            cmd_dev "$@" ;;
   config)         cmd_config "$@" ;;
   lan)            cmd_lan "$@" ;;
+  ipv6)           cmd_ipv6 "$@" ;;
   mixin)          cmd_mixin "$@" ;;
   relay)          cmd_relay "$@" ;;
   profile)        cmd_profile "$@" ;;

scripts/core/common.sh

@@ -1933,6 +1933,32 @@ runtime_config_allow_lan() {
   esac
 }
 
+runtime_config_ipv6_enabled() {
+  local file
+  local value
+  file="$(runtime_config_file)"
+  [ -s "$file" ] || return 1
+
+  value="$("$(yq_bin)" eval '.ipv6' "$file" 2>/dev/null | head -n 1)"
+  case "$value" in
+    false) echo "false" ;;
+    *) echo "true" ;;
+  esac
+}
+
+runtime_config_dns_ipv6_enabled() {
+  local file
+  local value
+  file="$(runtime_config_file)"
+  [ -s "$file" ] || return 1
+
+  value="$("$(yq_bin)" eval '.dns.ipv6' "$file" 2>/dev/null | head -n 1)"
+  case "$value" in
+    true) echo "true" ;;
+    *) echo "false" ;;
+  esac
+}
+
 runtime_port_value_is_valid() {
   local port="${1:-}"
 

scripts/core/completion.sh

@@ -213,6 +213,17 @@ _clash_for_linux_complete_lan() {
   fi
 }
 
+_clash_for_linux_complete_ipv6() {
+  local cur="$1"
+  local rel_index="$2"
+
+  COMPREPLY=()
+
+  if [ "$rel_index" -eq 1 ]; then
+    _clash_for_linux_add_matches "$cur" on off auto status enable disable reset help -h --help
+  fi
+}
+
 _clash_for_linux_complete_mixin() {
   local cur="$1"
   local rel_index="$2"
@@ -347,7 +358,7 @@ _clash_for_linux_complete_top_level() {
   COMPREPLY=()
   _clash_for_linux_add_matches "$cur" \
     add use ls health select mode test on off status status-next \
-    boot log logs doctor ui secret tun dev config lan mixin \
+    boot log logs doctor ui secret tun dev config lan ipv6 mixin \
     relay profile sub proxy upgrade update completion help \
     -h --help
 }
@@ -426,6 +437,7 @@ _clash_for_linux_complete_command() {
     boot) _clash_for_linux_complete_boot "$cur" "$rel_index" "$arg1" ;;
     config) _clash_for_linux_complete_config "$cur" "$rel_index" "$arg1" ;;
     lan) _clash_for_linux_complete_lan "$cur" "$rel_index" ;;
+    ipv6) _clash_for_linux_complete_ipv6 "$cur" "$rel_index" ;;
     mixin) _clash_for_linux_complete_mixin "$cur" "$rel_index" ;;
     relay) _clash_for_linux_complete_relay "$cur" "$rel_index" "$arg1" ;;
     sub) _clash_for_linux_complete_sub "$cur" "$rel_index" "$arg1" ;;

scripts/core/config.sh

@@ -276,6 +276,46 @@ config_bool_env_value() {
   esac
 }
 
+config_ipv6_mode() {
+  local value
+
+  value="${CLASH_IPV6:-}"
+  [ -n "${value:-}" ] || value="$(read_env_value "CLASH_IPV6" 2>/dev/null || true)"
+
+  case "${value:-auto}" in
+    true|1|yes|on)
+      echo "true"
+      ;;
+    false|0|no|off)
+      echo "false"
+      ;;
+    auto|"")
+      echo "auto"
+      ;;
+    *)
+      echo "auto"
+      ;;
+  esac
+}
+
+set_config_ipv6_mode() {
+  local mode="$1"
+
+  case "$mode" in
+    true|false)
+      write_env_value "CLASH_IPV6" "$mode"
+      export CLASH_IPV6="$mode"
+      ;;
+    auto)
+      unset_env_value "CLASH_IPV6" || true
+      unset CLASH_IPV6 2>/dev/null || true
+      ;;
+    *)
+      die "IPv6 模式只允许 true / false / auto"
+      ;;
+  esac
+}
+
 tun_auto_route() {
   config_bool_env_value "CLASH_TUN_AUTO_ROUTE" "true"
 }
@@ -483,7 +523,7 @@ local_subscription_share_links_to_subconverter_url() {
       sub(/[[:space:]]+$/, "")
     }
     $0 == "" || $0 ~ /^#/ { next }
-    $0 ~ /^(vmess|vless|trojan|tuic):\/\// {
+    $0 ~ /^(vmess|vless|trojan|tuic|hysteria2|hy2|anytls):\/\// {
       if (out != "") {
         out = out "|"
       }
@@ -577,7 +617,7 @@ local_subscription_convert_url_from_url() {
   fi
 
   rm -f "$decoded_file" 2>/dev/null || true
-  die "本地订阅不是 Clash YAML，且无法识别为 Base64 或 vmess/vless/trojan/tuic 分享链接：$local_path"
+  die "本地订阅不是 Clash YAML，且无法识别为 Base64 或 vmess/vless/trojan/tuic/hysteria2/hy2/anytls 分享链接：$local_path"
 }
 
 download_candidate_probe() {
@@ -801,7 +841,8 @@ normalize_runtime_config() {
   local file="$1"
   local mixed_port controller tun_enable_value tun_stack_value dns_port_value controller_secret_value
   local tun_auto_route_value tun_auto_redirect_value tun_strict_route_value tun_dns_hijack_value
-  local dashboard_dir_value dashboard_url_value allow_lan_value
+  local dashboard_dir_value dashboard_url_value allow_lan_value ipv6_mode_value
+  local ipv6_value dns_ipv6_value
   local resolved_ports err_file output
 
   [ -s "$file" ] || die "待规范化的配置文件不存在：$file"
@@ -822,11 +863,27 @@ normalize_runtime_config() {
   dashboard_dir_value="$(runtime_dashboard_dir)"
   dashboard_url_value="$DEFAULT_DASHBOARD_UI_URL"
   allow_lan_value="$(config_allow_lan 2>/dev/null || echo true)"
+  ipv6_mode_value="$(config_ipv6_mode)"
+
+  case "$ipv6_mode_value" in
+    true|false)
+      ipv6_value="$ipv6_mode_value"
+      dns_ipv6_value="$ipv6_mode_value"
+      ;;
+    *)
+      ipv6_value="$("$(yq_bin)" eval '.ipv6' "$file" 2>/dev/null | head -n 1 || true)"
+      dns_ipv6_value="$("$(yq_bin)" eval '.dns.ipv6' "$file" 2>/dev/null | head -n 1 || true)"
+      case "$ipv6_value" in true|false) ;; *) ipv6_value="true" ;; esac
+      case "$dns_ipv6_value" in true|false) ;; *) dns_ipv6_value="false" ;; esac
+      ;;
+  esac
 
   err_file="$(mktemp)"
   if ! mixed_port="$mixed_port" \
     controller="$controller" \
     allow_lan_value="$allow_lan_value" \
+    ipv6_value="$ipv6_value" \
+    dns_ipv6_value="$dns_ipv6_value" \
     tun_enable_value="$tun_enable_value" \
     tun_stack_value="$tun_stack_value" \
     tun_auto_route_value="$tun_auto_route_value" \
@@ -847,6 +904,7 @@ normalize_runtime_config() {
       .["allow-lan"] = (env(allow_lan_value) == "true") |
       .mode = "rule" |
       .["log-level"] = (.["log-level"] // "info") |
+      .ipv6 = (env(ipv6_value) == "true") |
 
       .tun.enable = (env(tun_enable_value) == "true") |
       .tun.stack = env(tun_stack_value) |
@@ -858,7 +916,7 @@ normalize_runtime_config() {
 
       .dns.enable = (.dns.enable // true) |
       .dns["enhanced-mode"] = (.dns["enhanced-mode"] // "fake-ip") |
-      .dns.ipv6 = false |
+      .dns.ipv6 = (env(dns_ipv6_value) == "true") |
       .dns.listen = env(dns_listen_value) |
 
       .proxies = (.proxies // []) |
@@ -3311,7 +3369,7 @@ subscription_yaml_has_no_nodes() {
 }
 
 subconverter_default_subscription_user_agent() {
-  echo "clash.meta/1.18.0 clash/1.18.0 subconverter/0.9.0"
+  subscription_user_agent
 }
 
 subconverter_subscription_user_agent() {
@@ -4044,6 +4102,7 @@ fetch_subscription_source() {
 
 generate_config() {
   local active_source
+  local fetch_reason="${1:-auto}"
   local out_file="$RUNTIME_DIR/config.yaml"
   local tmp_dir source_file candidate_file
   local selected_csv="" included_csv="" failed_csv=""
@@ -4073,7 +4132,7 @@ generate_config() {
 
   selected_csv="$active_source"
 
-  if ! fetch_subscription_source "$active_source" "$source_file" "auto"; then
+  if ! fetch_subscription_source "$active_source" "$source_file" "$fetch_reason"; then
     failed_csv="$active_source"
     if ! read_compile_error >/dev/null 2>&1; then
       if [ -n "${SUBCONVERTER_LAST_ERROR_SUMMARY:-}" ]; then
@@ -4128,5 +4187,5 @@ generate_config() {
 }
 
 regenerate_config() {
-  generate_config
+  generate_config "${1:-auto}"
 }

scripts/dev/check-runtime-config-normalization.sh

@@ -60,10 +60,14 @@ export RUNTIME_DIR="$tmp_dir/runtime"
 export BIN_DIR="$tmp_dir/bin"
 export LOG_DIR="$tmp_dir/logs"
 export CONFIG_DIR="$tmp_dir/config"
+unset CLASH_IPV6
 
 # shellcheck source=scripts/core/config.sh
 source "$PROJECT_DIR/scripts/core/config.sh"
 
+# Keep this regression test independent from the developer's project .env.
+read_env_value() { return 1; }
+
 resolve_runtime_ports() {
   printf 'MIXED_PORT_RESOLVED=7891\n'
   printf 'EXTERNAL_CONTROLLER_RESOLVED=0.0.0.0:9090\n'
@@ -90,31 +94,110 @@ mixed-port: 7890
 external-controller: 0.0.0.0:9090
 secret: old-secret
 allow-lan: false
-proxies: []
+ipv6: true
+dns:
+  ipv6: true
+proxies:
+  - name: hy2-ipv6
+    type: hysteria2
+    server: "2001:db8::1"
+    port: 443
+    password: test-password
+  - name: anytls
+    type: anytls
+    server: 192.0.2.1
+    port: 443
+    password: test-password
+    sni: example.com
 proxy-groups: []
 rules: []
 YAML
 
 normalize_runtime_config "$sample_config"
 
-assert_yq() {
+assert_file_yq() {
   local name="$1"
-  local expr="$2"
-  local expected="$3"
+  local file="$2"
+  local expr="$3"
+  local expected="$4"
   local actual
 
-  actual="$("$BIN_DIR/yq" eval "$expr" "$sample_config")"
+  actual="$("$BIN_DIR/yq" eval "$expr" "$file")"
   if [ "$actual" != "$expected" ]; then
     echo "not ok - $name: got '$actual', expected '$expected'" >&2
-    "$BIN_DIR/yq" eval '.' "$sample_config" >&2 || true
+    "$BIN_DIR/yq" eval '.' "$file" >&2 || true
     return 1
   fi
   echo "ok - $name"
 }
 
+assert_yq() {
+  assert_file_yq "$1" "$sample_config" "$2" "$3"
+}
+
 assert_yq "keeps resolved mixed-port" '.["mixed-port"]' "7891"
 assert_yq "removes legacy port" 'has("port")' "false"
 assert_yq "removes legacy socks-port" 'has("socks-port")' "false"
 assert_yq "removes legacy redir-port" 'has("redir-port")' "false"
 assert_yq "removes legacy tproxy-port" 'has("tproxy-port")' "false"
 assert_yq "keeps controller normalization" '.["external-controller"]' "0.0.0.0:9090"
+assert_yq "preserves subscription IPv6" '.ipv6' "true"
+assert_yq "preserves subscription DNS IPv6" '.dns.ipv6' "true"
+assert_yq "preserves Hysteria2 proxy type" '.proxies[0].type' "hysteria2"
+assert_yq "preserves IPv6-only proxy server" '.proxies[0].server' "2001:db8::1"
+assert_yq "preserves AnyTLS proxy type" '.proxies[1].type' "anytls"
+assert_yq "preserves AnyTLS SNI" '.proxies[1].sni' "example.com"
+
+CLASH_IPV6=false normalize_runtime_config "$sample_config"
+assert_yq "IPv6 off disables kernel IPv6" '.ipv6' "false"
+assert_yq "IPv6 off disables DNS IPv6" '.dns.ipv6' "false"
+
+unset CLASH_IPV6
+normalize_runtime_config "$sample_config"
+assert_yq "auto preserves disabled kernel IPv6" '.ipv6' "false"
+assert_yq "auto preserves disabled DNS IPv6" '.dns.ipv6' "false"
+
+CLASH_IPV6=true normalize_runtime_config "$sample_config"
+assert_yq "IPv6 on enables kernel IPv6" '.ipv6' "true"
+assert_yq "IPv6 on enables DNS IPv6" '.dns.ipv6' "true"
+unset CLASH_IPV6
+
+default_config="$tmp_dir/default-ipv6-config.yaml"
+cat > "$default_config" <<'YAML'
+proxies: []
+proxy-groups: []
+rules: []
+YAML
+
+normalize_runtime_config "$default_config"
+assert_file_yq "auto keeps kernel IPv6 default enabled" "$default_config" '.ipv6' "true"
+assert_file_yq "auto keeps legacy DNS IPv6 default disabled" "$default_config" '.dns.ipv6' "false"
+
+default_subscription_ua="$(
+  unset CLASH_SUBSCRIPTION_UA CLASH_SUB_UA
+  subconverter_subscription_user_agent
+)"
+if [ "$default_subscription_ua" != "clash-verge/v2.4.0" ]; then
+  echo "not ok - modern protocol subscription UA: got '$default_subscription_ua'" >&2
+  exit 1
+fi
+echo "ok - modern protocol subscription UA"
+
+share_links="$tmp_dir/modern-share-links.txt"
+cat > "$share_links" <<'EOF'
+vmess://legacy
+hysteria2://password@example.com:443
+hy2://password@example.com:443
+anytls://password@example.com:443
+EOF
+
+converted_links="$(local_subscription_share_links_to_subconverter_url "$share_links")"
+case "$converted_links" in
+  *"hysteria2://"*"hy2://"*"anytls://"*)
+    echo "ok - recognizes Hysteria2, hy2 and AnyTLS share links"
+    ;;
+  *)
+    echo "not ok - modern share links were dropped: $converted_links" >&2
+    exit 1
+    ;;
+esac

scripts/dev/check-sub-update-compat.sh

@@ -19,7 +19,7 @@ calls_file="$tmp_dir/sub-update-calls"
 output_file="$tmp_dir/sub-update-output"
 
 prepare() { :; }
-regenerate_config() { printf 'regenerate\n' >> "$calls_file"; }
+regenerate_config() { printf 'regenerate:%s\n' "${1:-}" >> "$calls_file"; }
 apply_runtime_change_after_config_mutation() { printf 'apply\n' >> "$calls_file"; }
 print_config_regen_feedback() { printf 'regen-feedback\n' >> "$calls_file"; }
 print_config_apply_feedback() { printf 'apply-feedback\n' >> "$calls_file"; }
@@ -31,7 +31,7 @@ if ! ( cmd_sub update ) > "$output_file" 2>&1; then
   exit 1
 fi
 
-expected_calls="$(printf '%s\n' regenerate apply regen-feedback apply-feedback)"
+expected_calls="$(printf '%s\n' regenerate:manual-refresh apply regen-feedback apply-feedback)"
 actual_calls="$(cat "$calls_file")"
 if [ "$actual_calls" != "$expected_calls" ]; then
   echo "not ok - clashctl sub update should follow the config regen path" >&2
@@ -40,6 +40,7 @@ if [ "$actual_calls" != "$expected_calls" ]; then
 fi
 
 echo "ok - clashctl sub update follows the config regen path"
+echo "ok - clashctl sub update bypasses stale subscription cache"
 
 # Verify both the sourced-shell compatibility function and the installed command wrapper.
 # shellcheck source=../core/common.sh